Finger
print jewellery is one of the best ways to keep the loved one’s
memory for a life time. The manufacturing of Fingerprint Jewellery
depends upon companies to companies i.e., which type of material they
are using to manufacture a particular type of jewellery i.e.,
pendants, earrings, lockets etc. The key point that should be kept in
mind is that the basic of manufacturing this remains same. The steps
that should be taken in order to manufacture finger print jewellery
are as follows:
The
first step is to make an order to the company in order to get a
moulding kit or if a person has decided to make finger print
jewellery by himself, then he should collect some polymer clay. After
collecting the clay, the make step is to make more pliable by working
on it by hand.
The second step is to
make the finger print impression on the material. If a person wants
to get it done from the company, then he/she have to do it on the
moulding kit that is received from the company and the person who is
making it by himself have to do it on the clay. The person has to lay
a sheet of wax paper on the table and the conditioned clay on which
he has been doing work to make it more pliable. Before making the
impressions on the clay, it should be reduced to a thickness which is
specific for specific types of jewellery. After reducing the
thickness, gently put a finger on it & move it from side to side
in order to get a good fingerprint impression.
The
third step is to lay the fingerprint impression on a piece of baker’s
parchment paper and allow it to get harder for a couple of hours.
The
next step is to put the metal powder on the clay and the powder
should also be there in between the ridges of the fingerprint.
The
next step is to bake the clay according to the specifications of the
clay manufacturer.
Then
the fingerprint pendant should be cooled down and the basic
Fingerprint Jewellery
is almost ready without any finishing or shining properties.
Description:
The
whole process of manufacturing the finger print jewellery is not that
simple as it seems to be. Manufacturer has to make sure that during
each step the appropriate amount of material should be applied.
No comments:
Post a Comment